© Copyright A+D Supplies 2017 A+D Supplies, Marsh House, Brunel Road, Newton Abbot, Devon, TQ12 4PB www.adswsupplies.com
5. Pull out the fill-
ing hose
6. Attach filling
hose to tap
7. Fill the tank 8. Add Chemical
Take machine to a tap
Start filling the tank with
cold water
Do not use hot water
Make sure the machine is
back on it’s rear wheels.
Watch the solution tube
and turn off tap when the
tank is full
Take out the chemical
filling container
(Next to the filling hose)
Add the chemical.
Add pour into the tank
Setting Up the Machine Before Use
Warning: Only use low foaming chemicals at the right dilution
To Next Page
Loading...
