▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ PASTA FRESCA appliance
- 10 - English language
C234606300.fmIDM
CONTROL DESCRIPTIONS
The appliance is equipped with the listed control devices, required to run its main func-
tions.
A) Pushbutton used to turn on the appliance.
B) Pushbutton used to turn off the appliance.
C) Selector: used to select the working mode of appliance.
- Kneading cycle (1)
- Working stop (0)
- Extruding cycle (2)
D) Emergency stop button: used to stop appliance parts immediately in the event of im-
minent risk. After having normalized the operating conditions, unblock button to allow
machine operation again.
E) Pushbutton: used to activate the kneading cycle.
F) Pushbutton: used to activate the extruding cycle.
MPF/1,5 - MPF/2,5
MPF/8
MPF/4
C
B
A
L
H
A
D
A
D
E
F
B
G
F B E
M
HG L
IDM-34606300200.pdf
Translation of the original instructions
To Next Page
Loading...
