Fimco TR-40-EX - Page 10

Page 10
5-Nozzle Boom Assembly
(with 3/8” Hose, 1” Sq. Tubing & AIXR11002VP Tips)
 110° wide, tapered flat spray angle with air induction technology
for better drift management
 Made of 2-piece UHMWPE polymer construction which provides
excellent chemical resistance, including acids, as well as excep-
tional wear life
 Compact size to prevent tip damage
 Removable pre-orifice
 Excellent for systemic products and drift management
Opposite side has typical hardware setup
Hinge Detail
CROSS TEE ELL
Clamp
Bag of 5:
5277729
Based on the minimum overlap required to obtain uniform
distribuon with 110° ps and 20” spacing.
Suggested Minimum Spray Height: 16”-18” above what is
being sprayed (to plant, not ground).
Opmum Spray Height: 20”