FingerTec TA100 DIY SERIES User Manual

12
7
8
9
10
11
00000000-0
Place Finger
...
ESC/Exit
New User
000000001
Name:
Finger 1
New User
Shift NO
Pwd:
Privi: user
Admin Accredit
Admin
ESC OK
New User
Name:
Finger 2
Dept NO
12
13
14
15
16
Input
OK ESC
New User
Name: John
Finger 2
Dept NO
Save ?
000000001
ESC OK(Save)
User Mng
Name User
Viewing User
Dept Mng
Input
John
OK ESC
Place center of finger
properly at the sensor.
Place finger 3 times in
order for the reader to
capture the fingerprint
templates.
Read page 9 for tips
on fingerprint scanning
technique.
OK
Press once to
enroll backup
Fingerprint
Repeat the same
steps as above.
Press 4 times
OK
Press Once
Press to
select Admin
OK
Press once to
confirm.
Press 5 times
OK
Press Once
Input the names of Admin-
istrator.
Input the names of company.
Please refer to page 6 for
T9 input method.
* Please ignore this step if name was not
required in the report. If it was mandatory,
please continue.
ESC
Press once to return
to the previous page.
Continue with the next
steps.
OK
Press once to save
the name.
ESC
Press Once
OK
Press once to save
settings
ESC
Press twice to return
to the main menu.

FingerTec TA100 DIY SERIES Specifications

General

Brand	FingerTec
Model	TA100 DIY SERIES
Category	Security System
Language	English