FingerTec TA100 DIY SERIES User Manual

13
Welcome Check-In
09:00
01.01.09
User Mng
User Mng
New User
Viewing User
Dept Mng
1
2
3
4
5
6
New User
AC.No:
Name:
Finger
New User
000000002
ESC OK
New User
000000002
Name:
Finger
MENU
Press & Hold
OK
Press Once
OK
Press Once
OK
Press once to
assign user ID.
Enter user ID by press-
ing numeric keypad.
Example 000001
OK
Press once to
confirm
Press twice
OK
Press Once
7
8
9
10
11
00000002-0
Place Finger
...
ESC/Exit
New User
000000002
Name:
Finger 1
New User
Shift NO
Pwd:
Privi: user
Admin Accredit
User
ESC OK
New User
Name:
Finger 2
Dept NO
Place fingerprint center
point properly at the
sensor. Place finger 3
times in order for the
reader to capture the
fingerprint templates.
Read page 9 for tips
on fingerprint scanning
technique.
OK
Press once to
enroll backup
fingerprint
Repeat the same
steps as above
Press 4 times
OK
Press Once
Press to
select Admin
OK
Press once to
confirm.
Press 5 times
OK
Press Once
ENROLLMENT OF NORMAL USER
A normal user is only permitted to use the reader for identity verification, and he does
not have authority to access the system. To add a normal user, follow the steps below:

FingerTec TA100 DIY SERIES Specifications

General

Brand	FingerTec
Model	TA100 DIY SERIES
Category	Security System
Language	English