FingerTec TA100 DIY SERIES User Manual

15
Key in the user ID as de-
fined when enrolling a
finger on the fingerprint
reader. For example 1
for 00001.
Place the enrolled finger
properly on the finger-
print sensor.
Welcome Check-In
09:00
01.01.08
1:1 FP Verify
User ID 00001
Verifi ed
1:1 FP Verify
User ID 00001
Please Try Agn.
1
2
3
4
1:1 FP Verify
User ID 00001
ESC OK[Pwd]
The fingerprint sensor
verifies that the user ID is
00001.
If a finger failed to be
verified by the reader, it
will prompt the user to try
again.
Welcome Check-In
09:00
01.01.09
User Mng
User Mng
New User
Viewing User
Dept Mng
1
2
3
4
5
6
New User
AC.No:
Name:
Finger
New User
000000003
ESC OK
New User
Dept NO
Shift NO
Pwd:
MENU
Press & Hold
OK
Press Once
OK
Press Once
OK
Press once to
assign user ID.
Enter user ID by pressing
numeric keypad.
Example 000003
OK
Press once to
confirm
Press 5 time
OK
Press Once
Insert password via the
keypad.
The maximum length for
the password is 8 digit.
OK
Press once to
confirm
Re-enter the password to
confirm.
OK
Press once to
confirm
7
8
New Enroll
Password ********
ESC OK
New Enroll
Password ********
Pwd Affi
********
1 TO 1 (1:1) FINGERPRINT MATCHING
ENROLLMENT OF PASSWORD
For user who cannot enroll his/her fingerprint due to certain circumstances, he/she can
choose to use passwords. Follow the steps shown below to enroll users with password:

FingerTec TA100 DIY SERIES Specifications

General

Brand	FingerTec
Model	TA100 DIY SERIES
Category	Security System
Language	English