OPERATOR’S MANUAL
9
The smartest safe lock in the business.
3.4.2 Add Employees
Add a key to the system by enrolling a key to an available user number. Check
the Key Count to determine which slots are available. Keys for level 29 and
below are standard Sherlock keys. The Store Manager key has added permis-
sions because of User Number assignment only. Only the Area Manager (or
Owner/Super) key can enroll Users 01 through 29. This procedure assigns a
user number to a key and enables it with an active PIN. Once the key and PIN
are issued to the individual, that individual may change their own PIN. Keys for
the Area Manager and above are specially coded for their permission level and
require a different procedure.
1. Present Area Manager key.
2. Enter your 4 digit PIN code.
3. Select KEYS (press “2”).
4. Select ADD (press “3”).
5. Enter the two-digit User Number you are assigning to this key.
6. Remove the Area Manager key.
7. Insert the new key being enrolled.
8. Assign an initial four-digit PIN number for this user. Reenter this
PIN to verify the PIN assignment.
9. Remove the Employee key and the display will return to the normal
idle display.
USER #30
CODE? ____
PRESS # TO EXIT
07/22/02 08:40 A
ADMIN: AUDIT=1
KEYS=2 TIMES=3
TIMELOCK SET=4
CODES:CHG. PIN=1
DELETE=2 ADD=3
EMP COUNT=4
ENTER EMPLOYEE #
TO ADD __
REMOVE KEY
CANCEL=0
INSERT KEY
TO BE ADDED
CANCEL=0
ENTER NEW PIN
CODE? ____
CENCEL=0
REENTER NEW
CODE? ____
PIN # CHANGED
REMOVE KEY
Sherlock
SYSTEM READY
MONDAY
07/22/02 08:40 A
To Next Page
Loading...