Need help?Do you have a question about the Fire-Lite FCPS-24FS8 and is the answer not in the manual?
General| Output Voltage | 24 VDC |
|---|---|
| Relative Humidity | 0% to 93% non-condensing |
| Input Voltage | 120 VAC |
| Output Current | 8.0 A |
| Battery Capacity | 18 Ah |
| Battery Charging Current | 1.5 A |
| Operating Temperature | 0°C – 49°C (32°F – 120°F) |
Discusses limitations of fire alarm systems, including smoke detector issues and operational constraints.
Details the step-by-step procedure for initial start-up and configuration of the FCPS-24FS.
Outlines critical wiring requirements and separation based on the National Electrical Code (NEC).
Lists the specific settings for DIP switch SW1 to configure various system features.
Explains programmable features like synchronization, AC fail delay, and input/output functions.
Details supervision of FACP to FCPS wiring and detection of FCPS-24FS faults.
Details how to calculate the required dedicated AC branch circuit current for the system.
Guides on calculating battery size based on NFPA requirements and selecting appropriate batteries.
To Next Page
