3
Part Number 18002, G, 09/24/2019
General Information
The Fireboy Engine Shutdown Control (ESC) Systems are an effective means to automatically shut
down engines, generators, and blower systems in the event of a fire. By shutting down your
engine room systems, you will ensure that the fire cannot be fueled by the continued operation of
components on the engine as well as maintaining the proper agent concentration needed to
extinguish the fire.
The Engine Shutdown Control System consists of a Shutdown Control Module and a Helm Display
Unit with an Override button. Both should be installed at the helm so that there is access to the
ignition wiring.
Specification
System Specifications (ESC-0604-04D)
Operating Voltage: 9-32 VDC
Maximum Current Draw: 188mA @ 12 VDC
Operating Temperature: 22°F (-6°C) to 158°F (70°C)
Circuits: (2) 30 Amp, (4) 2 Amp
System Specifications (ESC-0622-04D)
Operating Voltage: 9-32 VDC
Maximum Current Draw: 188mA @ 12 VDC
Operating Temperature: 22°F (-6°C) to 158°F (70°C)
Circuits: (2) 30 Amp, (2) 10 Amp, (2) 2 Amp
System Specifications (ESC-0640-04D)
Operating Voltage: 9-32 VDC
Maximum Current Draw: 188mA @ 12 VDC
Operating Temperature: 22°F (-6°C) to 158°F (70°C)
Circuits: (2) 30 Amp, (4) 10 Amp
System Specifications (ESC-0806-04D)
Operating Voltage: 9-32 VDC
Maximum Current Draw: 188mA @ 12 VDC
Operating Temperature: 22°F (-6°C) to 158°F (70°C)
Circuits: (2) 30 Amp, (6) 2 Amp
System Specifications (ESC-0824-04D)
Operating Voltage: 9-32 VDC
Maximum Current Draw: 188mA @ 12 VDC
Operating Temperature: 22°F (-6°C) to 158°F (70°C)
Circuits: (2) 30 Amp, (2) 10 Amp, (4) 2 Amp
To Next Page
Loading...