Need help?Do you have a question about the Fireray One and is the answer not in the manual?
General| IP Rating | IP65 |
|---|---|
| Detection Method | Infrared Beam |
| Detection Range | Up to 200m |
| Range | Up to 200m |
| Operating Voltage | 12-24V DC |
| Voltage Range | 12-24V DC |
| Power Supply | 12-24V DC |
| Alarm Relay | 1A @ 30V DC |
| Fault Relay | 1A @ 30V DC |
| Output | Relay |
| Operating Temperature | +55°C |
| Temperature Range | +55°C |
| Housing | Polycarbonate |
| Type | Infrared Beam Detector |
All installations should comply with local regulations.
Mark and drill holes for mounting the base securely using appropriate hardware.
Describes how to access the user interface for alignment and settings.
Configuration options for fire alarm thresholds based on EN54-12 and UL268 standards.
Enables the detector to remain in Fire Alarm condition after the signal has recovered.
Procedure to clear a latched fire alarm condition using external voltage or power removal.
Details LED and relay status for normal, fault, and fire conditions.
Information on detector cleaning to prevent faults caused by dust build-up.
Procedures for performing fire tests and using the alarm filter.
Technical specifications including operating voltage, current, distance, and temperature.
Guidelines for proper disposal and recycling of the product in the European Union.
To Next Page