Firman P03504 User Manual

English Customer Service: 1-844-FIRMAN1
2. Oil and Gasoline
Add Engine Oil
We recommend using FIRMAN SAE 10W-30 API SJ oil for best performance. Other high-quality
detergent oils (API SJ or higher) are acceptable. Do not use special additives. Ambient temperature
determines the proper oil viscosity for the engine. Use the chart to select the proper oil for the
outdoor temperature range expected.
NOTICE Do not attempt to crank or start the engine before it has been properly filled with the
recommended type and amount of oil. Damage due to operation with no oil will void your warranty.
Degrees Celsiusº(Outside)
Full Synthetic 5W-30
Degrees Fahrenheitº(Outside)
5W-30 10W-40
10W-30
1.Place generator on a flat, level surface.
2.Clean area around oil fill and remove yellow oil fill cap/dipstick.
3.Wipe dipstick clean.
12
OPERATION
(H)
DRAIN PLUG
(L)
H
L

Firman P03504 Specifications

General

Type	Portable Generator
Fuel Type	Gasoline
Engine Displacement	208cc
Starting System	Recoil Start
Running Watts	3000 Watts
Noise Level	68 dBA
AC Output	120V
DC Output	12V
Engine Type	4-Stroke OHV
Outlet Types	2x 120V 20A (5-20R), 1x 120V 30A (L5-30R), 1x 12V DC