Firman P03615 User Manual

1
2
2
4-1 Data-Minder(Multi-Meter) – Push the
SELECT button to show the Voltage, Hertz and
running hours. If the low oil indicator is lit,
check the oil level.
3
4
5
7
120V, 30A RV (NEMA TT-30R)
Battery Power Restore Switch – Restore the
battery power to the control module. You must
press this switch and hold for 3 seconds before
start the generator, including recoil,
electric and remote start.
9
Outlet Cover - Protect the receptacles from
dust and debris.
10
11
Page 11
NOTE:
Total power drawn from all receptacles must not exceed the name plate rating.
Engine Start Switch – Used to start engine
from the starter motor(Electric start model
only). To start engine, press and hold the
switch in the “START”(ll) position, the
engine will crank and attempt to start. When
the engine starts, release the switch to the
“RUN”(l) position.
1
Control Panel
A - Digital display
B - AC voltage indicator
C - Frequency indicator
D - Hour indicator
E - Low oil indicator
F - Select button
English Customer Service: 1-844-FIRMAN1
Maximum full load 30 Amp current may be
drawn from this 120 Volt receptacle.
8
3
4
5
6
7
8
9
10
11
12
12
12
13
14
15
240V
120V
DC Circuit Breaker- Protect the DC receptacle.
12V DC Outlet Receptacle- Maximum full load
8.3 Amp current may be drawn from this 12 Volt
receptacle.
120/240V, 30A Twist-Lock – (NEMA L14-
30R) May be used to supply power for the
operation of 120/240 Volt, 30Amp.
6
7
120V, 20A Duplex ( NEMA 5-20R)
LED Light
Maximum full load 20 Amp current may be
drawn from this 120 Volt receptacle.
14
Voltage Selector Switch – To select
between 120 Volt or 240 Volt.
12
13
Ground Terminal – Consult an electrician
for local grounding regulations.
16
Two 3.1Amp-5.0 Volt DC USB Ports
15
17

Firman P03615 Specifications

General

Brand	Firman
Model	P03615
Category	Inverter
Language	English