English Customer Service: 1-844-FIRMAN1
16
OPERATION
2. Remote Start Operation
Push and release the "STOP" button on the remote control. The generator will run for an additional
15 seconds as it goes through a cool down cycle before shutting off.
Skip this step and go to step 3, if you are not using Remote Start to shut down the engine.
Flip the engine switch to“OFF”(O) position.
STOP
3. Electric Start and Recoil Start Operations
4. Flip the battery switch on "OFF"(O) position.
STOP
If a cover is used, do not install until unit has cooled.
5. Turn the fuel valve to the “OFF”(O) position.
The battery switch always should be in "OFF"(O) position at the end of use to prevent battery drain.
NOTICE
To Next Page
Loading...
Need help?
General
