FA2000C Installation and Setup Guide
vi
Conventions Used in This Manual
•••••••••••••••••••••••••••••••••••••••••••••••••
Before you begin using this manual, it is important that you understand the meaning of the following symbols (icons).
U
L
These notes include specific information that must be followed if you are installing this system for a UL
Listed application.
These notes include information that you should be aware of before continuing with the installation, and
that, if not observed, could result in operational difficulties.
This symbol indicates a critical note that could seriously affect the operation of the system, or could cause
damage to the system. Please read each warning carefully. This symbol also denotes warnings about
physical harm to the user.
ZONE PROG?
1 = YES 0 = NO 0
Many system options are programmed in an interactive mode by responding to
alpha keypad display prompts. These prompts are shown in a single-line box.
00 Additional system options are programmed via data fields, which are indicated by a “star” () followed
by the data field number.
PRODUCT MODEL NUMBERS:
Unless noted otherwise, references to specific model numbers represent HONEYWELL products.
To Next Page
Loading...
