Firstech 2WT13R-SF User Manual

Quick Reference
Remote Maintenance – Battery Charging
The 2WT13R-SF comes with a rechargeable battery. Use the included power adapter and micro
USB cable to charge your remote.
First, locate the micro USB port on the top of your remote. Connect your micro USB cable to your
computer or USB power adapter. The LCD on the front of the remote will showing that your remote
is charging. This should take approximately 2 hours.
2 Way Remote Button Functions
Button Duration Description
half second Locks doors and if equipped, arms the alarm.
Double Tap
Used as Auxiliary 2 and Sliding door left, Head lights
function according to the setting of AUX 2 Config in the
remote menu.
Not available when set to OFF in AUX 2 Config of the
remote menu.
Long Hold
(2.5 sec)
Panic/vehicle locater (flashes vehicle’s parking lights
and sounds siren and horn).
Short
(0.5 sec)
LCD View / Car Check (updates vehicle status on
remote pager) / Secure Auxiliary / Temperature Display /
Vehicle Voltage Display
Double
Accesses Remote Menu (LCD View, Passive arming,
Alert mode, etc) See Remote Menu Table for details.
Run time extender. Resets the run time for Turbo Timer
or Remote Start.
Long Hold
(2.5 sec)
Holding this button will start your vehicle. Repeat and
this will shut your vehicle down.
Short(0.5 sec) Unlocks doors and if equipped, disarms the alarm.
Double
Used as Auxiliary 1 and Sliding door right, Defrost
function according to the setting of AUX 1 Config in the
remote menu.
Not available when set to OFF in AUX 1 Config of the
remote menu.
Long Hold
(2.5 sec)
Trunk release. Triggers the trunk release output and
opens the vehicle’s trunk.
+
Long Hold
(2.5 sec)
Option programming menu 1. For use during installation.
+
Long Hold
(2.5 sec)
Option programming menu 2. For use during installation.

Firstech 2WT13R-SF Specifications

General

Brand	Firstech
Model	2WT13R-SF
Category	Automobile Accessories
Language	English