Need help?Do you have a question about the Fischer Panda xControl GC-S and is the answer not in the manual?
Defines responsibilities for settings, installation, and maintenance personnel.
General safety guidelines, warnings, and precautions for operating the generator.
Details the three main components: CP-G, GC-S, and CB-G.
Provides instructions for installing the ECU, Connection Box, and Control Panel.
Explains how to operate the xControl system using the CP-G panel, including starting and stopping.
Details the procedures and daily checks for starting the generator.
Introduces navigation and access to the xControl system menu for configuration.
Information on system faults, error codes, symbols, and troubleshooting guidance.
Lists and describes available accessories for the xControl system, including cables and frames.
Defines responsibilities for settings, installation, and maintenance personnel.
General safety guidelines, warnings, and precautions for operating the generator.
Details the three main components: CP-G, GC-S, and CB-G.
Provides instructions for installing the ECU, Connection Box, and Control Panel.
Explains how to operate the xControl system using the CP-G panel, including starting and stopping.
Details the procedures and daily checks for starting the generator.
Introduces navigation and access to the xControl system menu for configuration.
Information on system faults, error codes, symbols, and troubleshooting guidance.
Lists and describes available accessories for the xControl system, including cables and frames.
General| Model | xControl GC-S |
|---|---|
| Type | Generator Controller |
| Compatibility | Fischer Panda Generators |
| Communication | CAN bus |
| Mounting | Panel mount |
| Display | LCD |
| Remote Monitoring | Yes |
| Protection | Overtemperature, Overload |
| Input Voltage | 12V or 24V DC |
| Output Voltage | 12V or 24V DC |
To Next Page
