10
INSTALLATION INSTRUCTIONS
Product installation
●
Your Wine Cabinet will arrive with the front feet raised to make moving the product into
its final location a simple task.
●
Avoid moving the product in a sideways direction as this may damage the floor
covering/surface.
●
When moving the Wine Cabinet into its final position, make sure there are correct
clearances between the product and surrounding cabinetry.
Levelling your Wine Cabinet
●
It is important that all four corners of
the WineCabinet base are supported
firmly on the floor to eliminate any
cabinet movement.
●
Installing the appliance on a soft or
uneven/unlevelled floor may result
in twisting of the cabinet and poor
sealing of the door.
●
This Wine Cabinet has four adjustable
feet, which can be used to level the
appliance.
●
The front levelling foot on the hinge
side should take majority of the
cabinet’s weight and be stable, ie the
cabinet should not rock or wobble.
Before placing wine in your Wine Cabinet
●
Remove all internal packaging.
●
Clean the inside of the appliance to remove manufacturing and transportation dust.
Please refer to the ‘Cleaning care’ section of this user guide for further advice.
●
Allow the Wine Cabinet to run empty for 1–2hours, this allows the appliance to
acclimatise and remove any residual odours before making temperature adjustments.
Energy efficiency
For the most energy efficient use of your appliance:
●
Ensure your Wine Cabinet has adequate ventilation as recommended in the installation
instructions.
●
Avoid overcrowding shelves, as this reduces airflow.
●
Keep door openings to a minimum.
Counter-clockwise
to raise feet
Clockwise to
lower feet
To Next Page
Loading...
Need help?
General
