Fisher & Paykel 790 Active Smart - 10.10 Compressor Faults; 10.11 Compressor Runs Continuously

57
Refer to Section
10.1
Compressor will
not run and is cold
to touch
Refer to Section
10.12
Compressor will
not run and is hot
to touch
Refer to Section
10.11
Compressor runs
continuously
Are the
L.E.D.s on
the display
module
illuminated?
Is
refrigeration
taking place?
With FC door
closed and PC
door open, press
Mode button
Check for loss of
gas (leak) or
blockage
Check for correct fitting of
sensors. Check sensor
resistances (refer Section
6.1.11)
Refer to Section
10.3
Check for loss of
gas (leak) or
blockage
Yes
Yes
No
No
No
Are the FC/PC
reaching set
temperatures?
Yes
No
10.10 Compressor Faults
10.11 Compressor Runs Continuously