Need help?Do you have a question about the Fisher & Paykel 635 Active Smart and is the answer not in the manual?
General| ActiveSmart™ Technology | Yes |
|---|---|
| Finish | Stainless Steel |
| Frost Free | Yes |
| Door Alarm | Yes |
| Adjustable Shelves | Yes |
| Refrigerant | R600a |
| Door Finish | Stainless Steel |
| Total Capacity | 635L |
| Ice Maker | Yes |
| Shelves | Glass |
Details dimensions and capacities for various refrigerator models.
Provides electrical and mechanical data for R134a and R600a compressors.
Explains the structure and meaning of model numbers.
Lists specific tools required for appliance servicing.
Outlines safety measures, including ESD and environmental concerns.
Guidance on properly leveling the appliance.
Instructions for door reversal and necessary air clearances.
Explains key terms used throughout the manual.
Describes air circulation paths within the refrigerator compartments.
Outlines the defrost process for R134a and R600a systems.
Explains the basic refrigeration cycle and components.
Details the evaporator function and condensate management.
Illustrates condenser configurations for different models.
Explains the function of low ambient heaters and cooling fans.
Describes the types and resistance values of temperature sensors.
Guides on using the appliance and adjusting settings.
Describes the overall electronic system and component roles.
Details the function, protections, and memory of the control module.
Explains how the variable capacity compressor is controlled.
Covers internal protections like overload and power limitation.
Illustrates the input/output connections of the display module.
Explains the various features available on the display interface.
Provides tables for setting desired compartment temperatures.
Explains the process of ice production and icemaker operation.
Describes the sequence when the ice bin is detected as full.
Important warnings and precautions for water dispenser installation.
Details on the water filter, its replacement, and alerts.
Lists and explains fault codes for ice and water models.
Lists and explains fault codes for non-ice and water models.
Instructions for entering and navigating diagnostic modes.
Steps for replacing the icemaker printed circuit board.
Procedure for replacing the water inlet valve.
Steps for removing and replacing the display module.
Instructions for safely removing the water reservoir tank.
Crucial safety warnings before performing any servicing.
Guidelines for conducting insulation and earth continuity tests.
Step-by-step guide to remove the power/control module.
Essential safe practices when servicing sealed refrigeration systems.
Precautions and procedures for handling R600a refrigerant safely.
Detailed procedure for pressure testing the refrigeration system.
Wiring diagrams for non ice and water models.
Wiring diagrams for ice and water models.
Wiring diagrams for the 900 series models.
Troubleshooting guide for 'B' model refrigerators.
Troubleshooting guide for 'T' model refrigerators.
Flow chart to diagnose a refrigerator that is not operating.
Flow chart to troubleshoot power issues to the control module.
Flow chart for diagnosing warm compartments.
Flow chart for diagnosing mixed temperature issues.
Flow chart for issues related to ice or condensation.
To Next Page