321144
18
3.2 Door Hinging (Tasman Models Only)
The product leaves the factory hinged right hand or left hand. The door hinging can be changed by
obtaining a door hinge conversion kit appropriate for the cabinet being converted. There are a number of
kits changing the door hinging from RH to LH or from LH to RH. They also include two door B & T models,
single door models and “H” models in the 635, 680 and 790 cabinet widths, along with handle colours of
white and silver. Inox and Elegance models will require a complete door change.
3.3 Air Space Requirements
On all refrigerators and freezers it is important that an air gap is left around the product:
50mm (2 inches) clearance at the top.
20mm (¾ inch) clearance on each side.
3.4 Temperature Adjustment
Refer BASIC OPERATIONS in Section 4.23.
To Next Page
Loading...
