nsta ation instructions
It is IMPORTANT to level the washer to ensure good spin performance and effective detergent,
softener and bleach dispensing.
1 Separate the 4 rubber foot inserts from the moulding and fit into the feet on the base of
the washer.
2 Move the washer to its final position. (We suggest a minimum clearance of 1" (25 ram) each side).
s Adjust the feet so the washer is level and cannot rock.
II II Il
Adjustable feet
Rubber insert _:_
t
Fig5 Lewd/ling your w_;sher
"l" (25 ram) I" (25 ram)
Fig6 Minimum de:_mnces
4 Use the walls and adjacent counter tops as a sight guide to check to see if washer appears level.
Readjust the feet if necessary.
5 Open the lid and check the washer tub to see that it sits slightly' forward of centre. (See Fig. 7).
Incorrect Correct
adjustment adjustment
Fig.7
6 Turn on the water and check all hose connections for leaks. Make sure there are no kinks in the hoses.
7 Uncoil power cord and plug into wall socket
s Check for leaks, noise, vibration, correct water temperatures and proper operation in spin. Check
that the lid locks dudng spin.
To Next Page
Loading...
