The first time you turn your washer on
E_ectri¢ Shock Hazard
Read arid follow the IMPORTANT SAFETY _NSTRUCT[ONSoudined in this
User'Guide before operating this appliance, [}ages 3 - 5o
Failure to do so can result in death, electric shock, fire or injury to persons°
Control Panel Lighting
The panel lighting of your Aqu_Sm_rt _washer can be adjusted to suit the environment that
your washer is located in. For a low lighting situation you may need more lighting contrast and
for installations where there is a lot of ambient light, you may need less.
To adjust the control panem lighting:
1 Turn the washer on.
2 Press and hold the High Efficiency button for 2 seconds until you hear a quick beep. You will
then see a subtle change in the lighting contrast.
s To change the setting again simply repeat the process.
Your AqudSmdrt _ washer leaves the factory set For low ambient light conditions.
To Next Page
Loading...
