Before you do your first wash
You owe it to yourself and your AquoSmort _to have it installed correctly by an authorized
service agent.
Before you start, it is a good idea to go through the following checklist;
1 Hasthe basepacker been removed?
2 Is the hot hose connected to the hot valve marked'H'?
Is the cold hose connected to the cold valve marked 'C'?
s Is the drain hose threaded through the'U bend' hose guide
(with no more than sa" extended} and on to your standpipe?
4 Are the rubber inserts secured into the feet on the base of your
washer and is the washer levelled?
Refer to Installation instructions, pages 6 - 11.
AquaSmart T'_'water consumption
15.5 lb (7 kg) 20 G (76 L)
_ReguBr High Efficiency isthe default wash cycle for AquaSmartL
Note: Water consumptions are based on the AquoSmort _default settings,
AquaSmaW '_'capacity
Aqu_Smart _offers a generous 15,5 [b (7 kg) capacity, The list below outlines what is included in
a 15,5 Ib(7 kg) wash load (in accordance with ANS[/AHAM HLW-ol--2002),
S Bedsheets (double)
2 Tablecloths
4 Shirts
6 Bath towels
4 ]:shirts
4 Pillow cases
6 Shorts
6 Washcloths
S Handkerchiefs
We recommend for everyday use that you separate out your bed sheets and wash them on the
specially designed SHEETScycle,
To Next Page
Loading...
