Gettin 9 started quickly
1 PRESSPOWER to activate your Aquc_Smurt _ washer,
2 Select the desired WASH CYCLE that most closely matches your wash load.
3 HIGH EFFICIENCY- this light tells you when'High Efficiency' mode is recommended, and
the button allows you to switch between High Efficiency and Conventional modes (refer to
page 18),
4 Select any additional WASH OPTIONS that you may require (refer to page 26),
s If you wish to use fabric softener, place into Softener dispenser and select FABRIC SOFTENER
to turn the fabric softener option ON,
6 If you wish to use liquid bleach, place into the bleach dispenser and select BLEACH to turn
the bleach option ON,
7 PRESSSTART- your AquaSmurt _ will start to fill with water, and will automatically select the
correct water levd and wash action for your Ioad.Tb pause your AquaSmort _at any time,
simply touch START/PAUSE_
For best Fabric and color care remove your clothes as soon as the cycle has finished.
3
Failure to follow the advice in this User Guide may re.suit in damage to your garments, and
your expectations of wash pert:ormance may not be met.
To Next Page
Loading...
