iiiliiii,I,IIII, ilii,iii'liilii,i_,iliill¸liiil¸liiiliiliiliiilll¸Iililiiil¸Iiliiil¸Iiliiil¸Iiliiil¸II iiiiIiliiiiliiil¸Iiliiil¸Iiliiil¸IIiiiiiliiIIIii}I!!
Insttllttion instructions _ ::i:
= Watersopp_y
Th_swashermustbeplumbed_ntobothahotandcoldwatersuppl;,or_twUlnotwork
correctly. Please ensure that both hot and (::old water are connected to the washer.
If you have an uncontrolled water-heating source (eg. a wet back or solar heatinf_!)you should
have a tempering device fitted. [his will ensure the hot water temperature remains within
safe limits. For the most suitable type of tempering device we recommend you contact a local
plumber or plumbing supply merchant _ i:i
= InletWaterStatic_ressureSpsi(3SkPa)to1S0psi(1MPa)(Ifusinf_aheadertankthenthetopof
the header tank must be at [east 39" (2 m) above the top of your clothes washer), !;
Minimum flow rate from the faucet supplying the clothes washer should be greater than
I V*gallons/rain(6liters/rain)(assumes_9"(12,7ram) diameter pipes).
Minimum heightoffaucetsto clearthe to[]ofthe washer is45" (1150 ram).
= ae_u[ar[;,checkthat;,ourstandpipeorsettubJs_nk_sfreefrom[_ntorotherobstructions,which i_ii
may affect how your washer works or may cause flooding.
In mufti-storey apartments or any upper floor, the washer should be installed on a drained floor.
= Drainingmustcomplyw_thlocalby-laws.
Clothes washer safety
supervision, ii
Please superviseyoung children to ensure they do not play with this clothes washer. 1,
I !It
ff you are using an extension cord or a portable e/ectrica/ out/et device (eg° mu/ti-socket outlet
box). ensure that it, positioned so that it does not come ff_to contact with water or mo,ture.
A_essor_esaodspareparts
Available from your Fishe[_ & Paykel Deale_" or Authorized Sewke Center.
DrainHoseExtensionPartNo,42S627p
PowerCord [fthe_owerCordof;,'ourclotheswasher_sdamaged_tmustbe
replaced by a Fisher & Paykel Authorized Service Center, as it
is not a standard power cord. :'
To Next Page
Loading...
