29
To replace the spray arms and base rack
9
Clip the spray arms back onto their mounting valves. Be careful that you don’t force them too
hard and apply too much pressure on the wash pump housing. You should hear them click into
place. Rotate them with your hand to check that they are located properly.
10
Replace the base rack, lowering its front edge into position first.
11
Clip the glass supports back on and arrange the racking back to your preference.
12
Plug the dishwasher back in or turn it on at the power supply.
Note: Where there is broken crockery or glass in the drawer, it must be carefully removed to
prevent damage to the dishwasher.
User maintenance instructions - DD36/DD90 models
To Next Page
Loading...
Need help?
General
