5
TOOLS AND COMPONENTS
z
Keep all packing materials until the unit has been inspected.
z
Inspect the product to ensure there is no shipping damage. If any damage is detected
contact the dealer or retailer you bought the product from to report the damage.
z
Fisher & Paykel is not responsible for shipping damage.
Side mounting bracket
kits (2)*
*Optional | **Comes fitted to the product
Rubber washer (1)**
Drain hose support (1)
Flat-blade screwdriver
Level
Top mounting bracket
kit (1)*
Hexagonal socket kit (1)
Drain hose joiner (1)
Cross-head screwdriver
Pliers
Box cutter
Powered driver
Pencil
Moisture protection
tape (1)
Pre-finished toe kick
kit (1)
Wire clips (2)
5/8" (16mm) Phillips
screws (9)
Clamp (1)
Supplied
Not supplied
PARTS SUPPLIED TOOLS REQUIRED
INSTALL VIDEO
This video provides an overview of what is needed to install a DishDrawer™ Dishwasher. It is
intended as an overview only of the installation process and is not intended to be used as a
standalone guide on how to install a DishDrawer™ Dishwasher yourself. Installation should be
undertaken by a Fisher & Paykel trained and supported service technician or qualified person.
To access installation videos
Scan the QR code with your smartphone or watch online at:
fisherpaykel.com/dishdrawer-install
To Next Page
Loading...
