Fisher & Paykel DishDrawer DD60D2NX9 - Delay Start; Setting Delay Start; Cancelling Delay Start

15
Press and hold . Display will revert to wash
selection.
1
Press and hold until 01h appears in the
display.
Press and hold
to activate DELAY START.
and will flash. Release to start timer.
DELAY START allows you to set a 1–12 hour delay for the start of a wash program. The
selected delay time will show on the display. The wash will start once the delay time is over,
provided the drawer is closed.
Cancelling
DELAY START
1
2
3
4
DELAY START
Press to increase the delay time in 1-hour
increments. If you scroll past 12 hours, the
dishwasher will exit DELAY START mode.
Delay time can be increased as needed after
delay start has been activated. Press
to
increase the delay time in 1-hour increments.
Setting
DELAY START