Installation instructions
Installing your cooker
Important!
Connection of this cooker to fixed or flexible wiring must be made by a suitably registered
person. Connection by an unregistered person can cause a safety hazard.
Dimensions and clearances
Electrical connection
Some models have two side-mounted power outlets: the power socket on these cookers are
rated at 250V 10A AC only.
We recommend that the cooker sub circuit is protected by a suitably rated Miniature Circuit
Breaker (M.C.B) but not connected to a Residual Current Device (R.C.D) or an Earth Leakage
Breaker (E.L.C.B).
In New Zealand this appliance must be connected to the electrical supply using a cable fitted
with an appropriately rated plug. The plug must be compatible with the socket-outlet fitted to
the final subcircuit in the fixed wiring that is intended to supply the appliance.
Power
OR61S2CEWW
220-240/380-415 V 2N AC 50 Hz 47.6A
OR61S4CEWW
220-240/380-415 V 2N AC 50 Hz 47.6A
OR61S8CEWSW
220-240/380-415 V 2N AC 50 Hz 53.7A
WARNING!
Electrical Shock Hazard
Before obtaining access to terminals, all supply circuits must be
disconnected.
Failure to do so may result in death or electrical shock.
To Next Page
Loading...
