When refitting the sliding shelf supports, make sure that you fit:
• the side racks first
• the slides to the top wire of a shelf position (shelf positions 1 & 2 only in compact ovens)
• both sides of each pair of slides
Refit the oven shelves and grill pan
Slide in the shelves you need, making sure that:
• They slide between the two wires of a shelf position (unless a sliding shelf support is being use)
• The stop notches point down
• The guard rail is to the rear
https://producthelp.fisherpaykel.com/eu/Cook/Built-In_Ovens/Single/OB60SC9DEX1/User_Guide_OB60SC9DEX1/12_Care_…
Updated: Sat, 15 Feb 2020 09:47:27 GMT
Powered by
11
To Next Page
Loading...
