5
5
CABINETRY DIMENSIONS - SINGLE OVENS
Cabinetry dimensions (mm)
OB676SD
I
minimum inside width of cavity 724
J
overall width of cabinetry 764
K
minimum inside height of cavity 681
L
overall height of cabinetry 693
M
minimum inside depth of cavity 575
Note: If installing a cooktop above the oven, ensure adequate clearance is provided for the cooktop as per the cooktop
manufacturer’s instructions.
TOP
PROUD INSTALL
FLUSH INSTALL
SIDE
Important!
FLUSH INSTALLATION
The depth of the control panel (G) is larger than
conventional ovens. Ensure you have created a
38 mm recess in cabinetry.
If flush installing, you need to replace the lower
trim with the supplied long trim at the base of the
oven. Refer to Step 11 for instructions.
Important!
Make sure the cavity is completely sealed
with no gaps.
This is to ensure the oven cooling system
functions correctly.
To Next Page
Loading...
