EasyManua.ls Logo

Fisher & Paykel OB90 Series - Sliding Shelf Supports; Fitting and Removing Shelf Supports

Fisher & Paykel OB90 Series
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
Care and cleaning
Left
Do not use that level
Right
Refitting the sliding shelf supports
Removing and refitting the sliding shelf supports
Important!
Remove the side racks first to make removing the sliding shelf supports easier.
The sliding shelf supports can only be used on shelf position 1, 3 and 4.
They cannot be used on shelf position 2.
When refitting the sliding shelf supports, make sure that you fit:
the side racks first
the slides to the top wire of the shelf position
both sides of each pair of slides
both slides on the same level.
1
2
1
Removing the sliding shelf supports

Related product manuals