Levelling the Cooker
Using the supplied adjustable feet is MANDATORY. For safety reasons and to ensure adequate
ventilation, the cooker chassis MUST NOT sit directly on the floor, a plinth, or other support surface.
• For ease of installation, first remove the kickstrip. To remove the kickstrip, unscrew the two screws holding it in
place.
• The cooker is already fitted with four levelling feet.
• Level the cooker by screwing or unscrewing the feet.
• Make sure you follow the instructions in Figs. 2a, 2b, and 2c.
Nuts are supplied with the cooker in a separate kit.
• Do not refit the kickstrip until you have installed the anti-tip bracket.
https://producthelp.fisherpaykel.com/eu/Cook/Freestanding_Cookers/Dual_Fuel/OR90SDBGFX3/User_Guide_OR90SDBGFX…
Updated: Thu, 26 Mar 2020 03:34:19 GMT
Powered by
2
To Next Page
Loading...
