Replacing the Semi-Rapid Burners
• Carefully replace the burner parts as per the following Figs. 28-29.
• Check that:
◦ the ignitor is always clean to ensure trouble-free sparking.
◦ the probe is always clean to ensure correct operation of the safety valves (some models only)
Both the ignitor and probe must be very carefully cleaned using a toothbrush and methylated spirits
(see Fig. 24).
Fig. 28 Correct line-up of semi-rapid
burner parts
Fig. 29 Replacing the
https://producthelp.fisherpaykel.com/eu/Cook/Freestanding_Cookers/Dual_Fuel/OR90SDBGFX3/User_Guide_OR90SDBGFX…
Updated: Thu, 20 Feb 2020 06:37:43 GMT
Powered by
3
To Next Page
Loading...
