semi-rapid burner caps
Replacing the Triple-Ring Wok and Dual Burners
• Carefully replace the burner parts as per the following Figs. 30a-32.
• Fit the flame spreader to the housing as shown by the arrow in the Figs. 30a-30b. Make sure the burner is not
able to rotate (Fig. 31).
• Check that:
◦ the ignitor is always clean to ensure trouble-free sparking.
◦ the probe is always clean to ensure correct operation of the safety valves (some models only).
Both the ignitor and probe must be very carefully cleaned using a toothbrush and
methylated spirits (see Fig. 24).
Fig. 30a Correct positioning of the flame
spreader-triple ring wok burner
Fig. 30b Correct positioning of
flame spreader- dual burner
https://producthelp.fisherpaykel.com/eu/Cook/Freestanding_Cookers/Dual_Fuel/OR90SDBGFX3/User_Guide_OR90SDBGFX…
Updated: Thu, 20 Feb 2020 06:37:43 GMT
Powered by
4
To Next Page
Loading...
