34
REPLACING THE OVEN LAMP
The oven lamp must have the following specifications.
y Structure suitable for high temperatures up to 300°C.
y Power supply: see the V/Hz value on the serial number plate.
y Power 25W.
y Type G9 connector.
IMPORTANT!
Ensure the appliance is off before replacing the
lamp to avoid the possibility of electric shock.
y To protect the oven cavity, spread a tea towel
inside the oven.
y Remove the screws holding the steel frame.
y Remove the old lamp by sliding it out of its
socket and taking care not to break it.
y Insert the new bulb taking care not to touch
it with your hands (we recommend using a
disposable latex glove when handling the bulb).
y Replace the stainless steel frame taking care
not to pinch the silicone gasket seal.
y Re-insert the screws that were previously removed.
y Re-connect the oven to power.
To Next Page
Loading...
