Fisher & Paykel Smart Drive - Washing Machine Installation (Continued); Hot Water Supply Temperature Guidelines; Levelling Your Washing Machine

: ~ .
,INSTALLATION
,HOT WATER SUPPLY TEMPERATURE • '
Q' Yo~r ,hotwater should not exceed 65°C '
(150°F.).Water,abQve this temperature will
, ,cause damage to the machine. ' ,
,
o if you have an uncontrolled water heating
source,(e.g. wetbackor solar heating
system) you should fit a Safe Valve. This
,willtimsure the hot·watertemperature.-
remains within safe Hr:nits.
Hot 'n' Safe Valvesavailabla are:
RMC TV75 ,.'20mmfitti,ng (3/4 hlch pipe)
RMC TV 50 15mm fitting (112 inchpip~)
RMG TV 75A) Adjustabletemperature '
.;HMC TV 50A) between35°C.- 65°C'
. Consult Q pllJmber or electrician if you are
, :ul'lable to adjust the water temperature.
• DRAINING
O'Drai!1.ngmust complywithlocal by-laws;
,Inml:llti-~tor,ey. apartirlentspr an upper,
floor,the machine should be installed on a
drain'eel floor. "." , " '
, 0 Regularly check that your stanapipe ortub
, is free from lint or other-obstructions, as,
_ ,thi$may affect thEifl,mcticining of your .
, machine,.,
'. LOW WATER, PRESSURE,,',
: , A slow flow r<3t€! into your machine will be , '
improved by removing the flow contr.ol wa'sher .. '
o The flowcohtrolwasher is fitted ,in the inlet
valves onthe Jear efyourmachine. '
o Disconnectthe~inlet hose,usingpUers'
remove the inlet valve filter and flow control'
IJV8sher;Refitinlet valVe fHtehmd inlet hose.
o Spray rinse mavnotbe effective on,.
extr~mely low: water pressu·r~s. We,
recommend reprogramming,your rinse.
options so the spray rinse is replacedwith a
short spin or aqeeprinse. , , "
(R~fer to Programming Your Options
page 18). ' .
,':,
4
'.
'.. ,INSTALLATION
.,' LEVELLING. YOUR MACHINE
It IS rm.pertant that your Smart Drive is level
and~sit~ firmly ontha-floor. .
,,1, Fitthe 4 rubbe(inserts (from accessory kit)
into the adjustable feet on the base of the
',machine,' , '
,
.
/
. I .
I
~_ III ADJUSTABLE FEET
& ' 'III ' ,RUBBER INSERT
~
,
/.
2. Adju$t the feet torrfakesure themqchineis
level and cann.otrock. . .
t' .'
3; . Use the bench, cupboards, sink or Walls as a
guide to c~epk,that yourmachine is level.
Readjust the feet if ne.cessary.
"
5