14
15
Using Your Dryer
3. Lint Bucket
The SmartLoad™ dryer’s lint removal system is unique; unlike other dryers SmartLoad™
automatically removes the lint for you, all you have to do is tip the lint out!
The lint filter is hidden behind the lint bucket. As the air passes
through this filter the lint is caught on the fine mesh. Once the lint
is about 1/8 inch thick it comes into contact with a scraper which
deposits it into the bucket. This process is automatically performed
every time lint builds up on the filter.
Apart from the benefit of not having to scrape the lint after every
cycle, it also means the drying efficiency is not affected by lint build
up during the drying cycle.
The lint bucket is located inside the dryer on the left-hand
side. You can remove it by gently pulling the handle and lifting
outwards. It slots easily back into place.
This lint bucket does not need to be cleaned as regularly as other
dryer’s lint filters. The lint bucket only needs to be emptied once
the lint reaches the top of the transparent section.
It is important that you run your dryer with the lint bucket in place at all times.
4. Power
To turn on your dryer, press the POWER button located at the top
left-hand corner of the control panel.
To Next Page
Loading...
Need help?
General
