1 Spin speed adjustment button
2 Time delay button
3 Additonal function buttons
4 Start/Pause and Cancel button
5 Program selection knob
6 Display screen
7 Child-proof lock indicator
8 Program follow-up indicators
9 On/Off button
Control panel
1234
56789
Using your machine
1 Ensure the machine is plugged in.
2 Turn the taps on completely.
3 Check that the hoses are connected tightly.
4 Press the “On/Off” button.
5 Open the door.
6 Unfold the laundry and place it loosely in the drum. Refer to the recommended load capacity
shown in the Program Selection Table.
Overloading the machine will result in unsatisfactory wash results and creased laundry.
7 Close the door.
8 Add the detergent and softener to the appropriate compartments and close the detergent
dispenser drawer.
9 Using the program selection knob, choose the appropriate cycle for your laundry according to
type, amount and degree of soiling.
10 Press the Start/Pause button to start the program.
Selecting a program and operating your machine
To Next Page
Loading...
Need help?
General
