Why does the PTFE bearing wear quickly in Fisher Scientific Laboratory Equipment?
If the PTFE bearing wears quickly on your Fisher Scientific Laboratory Equipment, it might be because the fluid level is too low in the tube. To resolve this, try immersing the probe deeper into the fluid.
What to do if the motor makes buzzing sound but is not working in Fisher Scientific 150 Homogenizer?
If the motor of your Fisher Scientific Laboratory Equipment is turned on and makes a buzzing sound but isn't working, make sure that the brushes are not worn and are correctly installed.
Why does the motor speed decline in Fisher Scientific 150 Homogenizer?
If the motor unit operating speed declines, stalls intermittently, or stops completely on your Fisher Scientific Laboratory Equipment, ensure that the brushes are not worn and are correctly installed.
General| Brand | Fisher Scientific |
|---|---|
| Model | 150 Homogenizer |
| Category | Laboratory Equipment |
| Language | English |
To Next Page