Fisher 1280-X Aquanaut

Need help?

Do you have a question about the Fisher 1280-X Aquanaut and is the answer not in the manual?

Summary

Setting Up Your Metal Detector

Setting Up for Land or Shallow Water

Instructions for adjusting the metal detector for land or shallow water use.

Setting Up for Diving

Recommended setup for underwater use, including stem length and coil angle.

Control Panel Overview

Control Panel Functions Explained

Explanation of the POWER/VOLUME, DISCRIMINATION, LED, and BATTERY TEST controls.

Discrimination Points

Searching Techniques

Pinpointing Targets

Target Recovery Methods

Screwdriver Method for Recovery

Method for recovering targets using a screwdriver while minimizing ground disturbance.

Plugging Method for Recovery

Method for recovering targets by cutting a plug of soil, suitable for moist ground.

Operating Tips and Best Practices

Saltwater Hunting Techniques

Battery Replacement

Battery Recharging Procedures

110-Volt Recharger Use

12-Volt Auto Recharger Use

Maintenance and Storage

Cleaning Procedures

Battery Compartment Care

Battery Door Gasket Orientation

Searchcoil Information

Warranty and Important Warnings