To Next PageTo Next Page
Need help?Do you have a question about the Fisher F22 and is the answer not in the manual?
General| Operating Frequency | 7.69 kHz |
|---|---|
| Weight | 2.3 lbs (1.04 kg) |
| Batteries | 2x AA |
| Pinpoint Mode | Yes |
| Warranty | 5 years |
| Depth Indicator | Yes |
| Display Type | LCD |
| Headphone Jack | Yes, 1/4 inch |
| Search Modes | Jewelry, Coin, Artifact, Custom |
| Water Resistance | Weatherproof |
| Audio Tones | 4 |
| Target-ID | 0-99 numeric |
| Ground Balance | Factory preset |
| Discrimination | Yes |
| Search Coil | 9-inch Concentric Elliptical Waterproof Coil |
| Sensitivity Levels | 10 levels |
Carry bags, pouches, caps, T-shirts, and digging tools.
Stereo headphones and audio accessories for enhanced listening.
Replacement search coils and protective covers for various sizes.
Warranty variations and shipping cost information for international customers.
Information on the searchcoil's waterproof capability and submersion limits.
Detector's inability to locate buried pipes or cables.
Detector's performance in highly mineralized or wet sandy soils.
Explains the 3-segment graphic indicating target depth.
Describes overload conditions and how to resolve them.
List of items required for the demonstration.
Instructions on how to position the detector for demonstration.
Guidance on demonstrating different detection modes.
How ground minerals affect signals and detector performance.
Ignoring unwanted metal objects like foil and nails.
Using Target-ID and conductivity graphics to identify targets.
Step-by-step guide to accurately locate buried targets.
Minimizing sensitivity drift during continuous pinpointing.
Alternative pinpointing method without using the PP button.
Overview of the detector's buttons and their functions.
Explanation of the 3-segment depth indicator for coin-sized objects.
Conditions causing overload and how to resolve them.
Adjusting speaker volume from 0 to 20, including FeTone™.
Adjusting sensitivity from 1 to 10 to reduce interference.
