Need help?Do you have a question about the Fisher F-Pulse and is the answer not in the manual?
General| Type | Pulse Induction |
|---|---|
| Water Resistance | Yes |
| Battery Life | Up to 20 hours |
| Sensitivity Adjustment | Yes |
| Audio ID | Yes |
| Vibration ID | Yes |
| LED Light | Yes |
| Power | 9V battery |
| Pinpointing | Yes |
| Display | No |
| Target ID | No |
| Ground Balance | Automatic |
| Waterproof | Yes |
| Search Coil | 10" Search Coil |
Warning sound indicating low battery levels.
Sound and auto-shutdown for critically low batteries.
Details on the pinpointer's waterproof capabilities and O-ring importance.
Instructions for powering the pinpointer on and off.
How to adjust the brightness level of the LED flashlight.
Customizing audio/vibration alerts and sensitivity levels.
Overview of the pinpointer's default configuration.
Details on the 9 available program settings for alerts and sensitivity.
Procedure to quickly restore stable operation.
Calibrating the pinpointer for mineralized ground or saltwater.
Adjusting frequency to minimize interference with other detectors.
Steps to perform a system reset for unresponsive devices.
Explanation of low-power mode and automatic shutdown features.
To Next Page
