헀
____________________________________
TIPS ON HOW TO USE PINPOINTER:
The F-Pulse is a powerful tool that will drastically reduce the time you
spend recovering buried objects while metal detecting.
If the target is close to the surface (3 inches or less) the F-Pulse can
detect the buried target prior to digging.
Detection from the surface can decrease the size of the plug you dig,
causing less damage to the sod.
The detection area on the F-Pulse is
360° along the tip and barrel of the
probe. For precise pinpointing, use the
tip of the probe. For larger areas use a
flat side-scan technique passing the
length of the barrel over the surface to
cover a larger area.
The F-Pulse will detect all kinds of metal including ferrous and non-
ferrous metals.
The target alert (audio or vibratory) is proportional, meaning the intensity
of the alert will increase as you get closer to the target.
SPECIFICATIONS:
Technology: Pulse Induction, bipolar, fully static
Pulse rate: 2500pps, 4% offset adjust
Sample delay: 15us
Response: Audio and/or vibratory
Sensitivity levels: 3
LED levels: 20
Waterproof:
6 feet for 1 hour
Temperature range: -15°C to 70°C
Batteries: (2) AA
Battery life: Alkaline 25 hrs
NiMH rechargeable 15 hrs
Lithium 50 hrs
To Next Page
Loading...
Need help?
General
