___________________________________
햸
On and Off
(tones described are at factory-default settings)
Power On: Quick-Press (press and release the
button, quickly)
• F-Pulse will beep and vibrate
• F-Pulse is ready to detect.
Power Off: Press-and-Hold the button.
• As soon as you hear the BEEP, release the button.
• The F-Pulse is off.
If you program the target-alarm to your own custom setting, your
programmed target-alarm will also be the indication you hear, or feel,
at power-on and power-off. For example: if you program the target
alarm to vibrate, the pinpointer will vibrate at turn-on and turn-off.
LED Flashlight
To adjust light illumination level:
1.
Start with power off.
2.
Press-and-Hold the button.
Continue to hold. Light will turn on and flash.
3.
Continue to press-and-hold the button and observe the
different levels of brightness.
• As long as you continue to hold the button, the F-Pulse will
cycle from Off, to Bright, then Brighter and Brightest.
• At the brightest setting, the light will flash.
• The cycle will continue and repeat until you release the button.
4.
Release the button at your desired level of illumination.
• Alarm will confirm program is set (beep, vibrate, or both).
5.
Device is powered on and ready to hunt.
6.
Your programmed level of illumination will be saved to memory,
even after power-down and after changing batteries.
OPERATION
To Next Page
Loading...
Need help?
General
