Do you have a question about the Fisher Gold Bug and is the answer not in the manual?
Operating Frequency | 19 kHz |
---|---|
Warranty | 5 years |
Search Modes | All Metal, Discrimination |
Ground Balance | Manual |
Audio Output | Speaker, 1/4" headphone jack |
Battery Type | One 9V battery |
Waterproof | Search coil |
Search Coil | 5 inch DD coil |
Length | Adjustable, 40" - 53" (102 cm - 135 cm) |
Key initial setup and usage advice for new users.
Detector's ability to ignore ground mineral signals for accurate detection.
Technique for precisely locating a buried metal object.
Method to move the armrest forward or backward for comfort.
Display segments showing remaining battery voltage and charge.
Sequential actions to guide the user through the initial detector test.
How soil minerals affect detector signals and the need for calibration.
Understanding and mitigating interference from external electronic sources.
Details on the ON/OFF/GAIN and DISC/ALL METAL/THRESHOLD knobs.
Explanation of the GROUND GRAB/PINPOINT and +/- buttons.
Procedure to calibrate the detector to local ground conditions.
Adjusting Gain, Mode, and Disc Level for target rejection.
Adjusting discrimination to exclude specific types of metal targets.
Explanation of how ground balancing cancels mineral interference.
Step-by-step guide for using the Ground Grab® function.
Reading the 2-digit numerical value for target identification.
Explains V.C.O. audio and LOW/HIGH tone beeps.
Advice on finding gold in different terrains and dealing with trash.
Magnetite-based rocks causing a distinct "boing" sound in All Metal Mode.
Strategies to reduce EMI, primarily by adjusting Gain and Threshold.
Detailed steps to accurately locate a buried target using the Pinpoint function.
Detailed mechanical, operating, and performance parameters of the detector.
Terms and conditions of the 5-year limited warranty.
Replacement searchcoils and protective covers for them.