EasyManuals Logo

Fisher F-Pulse User Manual

Fisher F-Pulse
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
BATTERIES:
The F-Pulse operates on 2 AA alkaline, lithium or nickel-metal
hydride batteries (not included).You can also use high quality
rechargeable batteries. Expect approximately 25 hours of
operation from alkaline batteries.
Do not use “Zinc-carbon” or “Heavy-duty” batteries.
To replace batteries:
1. Use a coin or flathead screwdriver.
2. Rotate counterclockwise to remove cap.
3. Install 2 AA batteries, positive-side down.
4. Rotate clockwise until snug to close and seal.
The battery compartment was designed to provide a snug fit
for the batteries. If you experience difficulties in removing
your batteries, tap the pinpointer against the palm of your
opposite hand to help dislodge the batteries.
Low-Battery Warning:
If your batteries are running low and need to be replaced,
you will hear a boop-boop-boop sound at power-down.
Critical Low-Battery:
If the batteries are totally spent, you’ll hear a boooooop
sound and the pinpointer will then turn itself off.
___________________________________

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fisher F-Pulse and is the answer not in the manual?

Fisher F-Pulse Specifications

General IconGeneral
BrandFisher
ModelF-Pulse
CategoryMetal Detector
LanguageEnglish

Related product manuals