Fisher 3582 - Page 47

Instruction Manual
D200138X012
3582, 582i, and 3583
February 2015
47
Key Description Part Number
582i (figure 26)
--- I/P Module
1 Housing
1/2‐14 NPT conduit connection
2 Cap, aluminum
--- Screw, (not shown)
Used to lock cap
3* O‐Ring, nitrile, used with integrally‐mounted
67CFR filter regulator 1E591406992
4 Nozzle Restriction Assembly,
Aluminum/Brass/SST
5 O‐Ring, Fluorosilicone
6* O‐Ring, Nitrile (2 req'd) 1C8538X0162
7 Tire Valve (not shown)
(2 req'd w/tire valve option) 1N908899012
8* O‐Ring, Nitrile 1H8762X0012
9 Machine Screw, 304 SST (2 req'd)
10 Wire Retaining Screw (2 req'd)
11 Machine Screw, SST (2 req'd)
12 Pipe Plug, steel (2 req'd w/pipe plug option)
13 Screw, pl steel, used with
integrally‐mounted 67CFR
filter/regulator (2 req'd)
Key Description Part Number
14* Supply Gauge, Dual Scale
0-30 psig/0-2 kg/cm
2
11B4040X042
0-60 psig/0-4 kg/cm
2
11B4040X052
14* Supply Gauge, Triple Scale
0-30 psig/0-0.2 MPa/0-2 bar 11B4040X012
0-60 psig/0-0.4 MPa/0-4 bar 11B4040X022
15 Lubricant, Lithium grease (not furnished with positioner)
16 Anti‐seize sealant (not furnished with positioner)
18 Self‐Tapping Screw, SST (2 req'd)
19 Nameplate, SST,
without 3rd party approvals
20* Case Gasket, cork
22* Output Gauge, Dual Scale
0-30 psig/0-2 kg/cm
2
11B4040X042
0-60 psig/0-4 kg/cm
2
11B4040X052
22* Output Gauge, Triple Scale
0-30 psig/0-0.2 MPa/0-2 bar 11B4040X012
0-60 psig/0-0.4 MPa/0-4 bar 11B4040X022
23* Filter 11B5996X012
24 Vent Assembly
25 Pipe Plug (required when a 582i is used
without an integrally‐mounted 67CFR
filter/regulator)
Steel
SST
Figure 26. Fisher 582i Converter
31B5995‐G
SECTION A‐A
A
A
I/P MODULE
67CFR
FILTER REGULATOR
NOTE:
GAUGES MAY BE REPLACED BY
PIPE PLUGS (KEY 12) OR TIRE
VALVES (KEY 7).
1
1
1
APPLY LUB/SEALANT
*Recommended spare parts