Fisher CA-2030 - SPECIFICATIONS; POWER AMPLIFIER SECTION; PREAMPLIFIER SECTION; GENERAL

FISHER CA-2030
WARNING:
SPECIFICATIONS
POWER AMPLIFIER SECTION
Continuous RMS sine wave power per channel
within stated bandwidth at no more than stated
distortion and with 8 ohm load
Power Bandwidth
Total Harmonic Distortion at rated power
IM. Distortion
Speaker Damping
PREAMPLIFIER SECTION
Frequency Response
Phono (20 Hz — 20 kHz)
Aux (20 Hz — 20 kHz)
Input Sensitivity and Impedance
Phono
Tape Monitor 1,2
Tuner
Auxiliary
Phono Max. Input Capability
Phono
Tone Control
Bass (100 Hz)
Treble (10 kHz)
Filter
Subsonic (6 dB/Oct.)
Loudness Contour (100 Нг/10 kHz)
Hum and Noise (IHF Short Circuit, A Network)
Phono
Tape Monitor
Tuner
Auxiliary
Output Voltage and Impedance
Tape Out
GENERAL
Power Requirements
Dimensions (WxDxH)
Weight
30 Watts
20 Hz — 20 kHz
0.03%
0.03%
50
+0.5 dB
+05 dB
2.5 mV/50kQ
150 mV/50 kQ
150 mV/50 КО,
150 mV/50 kQ
230 mV
+1098
+1008
-3 dB
+8 dB/+3 dB
80 dB
95 dB
95 dB
95 dB
150 mv/200 Q
AC: 110/220 V
200 W/250 VA
440 x 310 x 89.5 mm
79kg
* Specifications are subject to change without notice.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
-16 -