EU and EW Series Valves
Instruction Manual
August 2010
22
Table 6. Approximate Weights
END
CONNECTION
APPROXIMATE
WEIGHT
Size, NPS Type
(1)
kg lb
12
RF
1410 3100
RTJ
BW 1220 2700
16 x 12
RF
1720 3800
RTJ
BW 1450 3200
16
RF
2540 5600
RTJ
BW 2270 5000
16
CL900
RF
2680 5900
RTJ
20 x 16
CL600
RF
3540 7800
RTJ
BW 3130 6900
20 x 16
CL900
RF
3720 8200
RTJ
20
RF
5220 11,500
RTJ
BW 4810 10,600
24 x 16
RF
5220 11,500
RTJ
BW 4630 10,200
24 x 20
RF
7710 17,000
RTJ
BW 7120 15,700
1. RF—raised face; RTJ—ring-type joint; BW—buttwelding.
Parts List
Note
Part numbers are shown for recommended spares
only. For part numbers not shown, contact your
Emerson Process Management sales office.
Key Description Part Number
Valve Body
1 Valve Body
2* Valve Plug
3* Cage
Key Description Part Number
6* Seat Ring Seal (EUT-2 & EWT-2 Valves Only)
7* Valve Plug Stem
8* Pin
9* Seat Ring
10* Bonnet Gasket
11* Cage Gasket
13* Seat Ring Gasket (EUD, EWD, EUT, and EWT valves only)
15 Stud
16 Hex Nut
17 Drain Plug, optional
28* Seal Ring (EUT-2 and EWT-2 valves only)
28* Piston Ring (2 req’d) (EUD and EWD valves only)
49* Cap Screw (EUD, EWD, EUT, and EWT valves only)
219* PEEK Anti-extrusion ring (EUT and EWT valves only)
Bonnet
1 Valve Bonnet
3 Packing Box Flange
4 Packing Flange Stud (2 req’d)
5 Packing Flange Nut (2 req’d)
PTFE V-Ring Packing
6* Packing Set, PTFE (1 req’d) for single
packing; 2 req’d for double packing) 1R290801012
8 Spring, stainless steel (single packing
only) 1D387437012
8 Lantern Ring, stainless steel (double
packing only) 0W087135072
10 Special Washer, stainless steel (single
packing only) 1H995936042
PTFE/Composition Packing
7* Packing Ring, PTFE/composition (8 req’d) 1D7520X0012
8 Lantern Ring, stainless steel 0W087135072
Graphite Ribbon/Filament Packing
7* Packing Ring, Graphite Ribbon (2 req’d for
single packing; 3 req’d for double
packing) 1V5666X0022
7* Packing Ring, Graphite Filament (3 req’d
for single packing; 3 req’d for double
packing) 1D7520X0162
8 Lantern Ring, stainless steel (2 req’d
for single packing; 1 req’d for double
packing) 0W087135072
11 Packing Box Ring
12* Upper Wiper, Felt (PTFE packings only) 1J873006332
13 Packing Follower
14 Pipe Plug
25 Cap Screw (8 req’d)
26 Hex Nut (8 req’d)
*Recommended spare parts